| Product Information: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Limited Lifetime Warranty (Warranty coverage requires adherence to Turncraft's installation and painting instructions, and is limited to materials only.) |
| Fluted and Raised Panel shafts are designed to allow field trimming up to 6" (trim from bottom only) |
| Columns must be trimmed to 1/4" shorter than the required opening to allow for product expansion. (The cap moulding will cover the 1/4" space.) Specifications shown are subject to change without notice. |
| Columns are NOT load bearing. |
| Non-Tapered shafts are 1/2" shorter than nominal. The cap can be raised to the overhead beam/soffit to cover any gaps. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TAPERED COLUMNS: |
|
|
|
|
|
|
|
|
|
| Column Nominal Bottom Width |
Column NET Bottom Width* |
Column Nominal Top Width |
Column NET Top Width |
Base Plinth Width |
Base Plinth Height |
Base Moulding Height |
Base Inside Opening |
Cap Abacus Width |
Cap Abacus Height |
Cap Moulding Height |
Cap Inside Opening |
| 10 |
9 5/8 |
6 |
5 5/8 |
13 5/8 |
1 |
1 1/4 |
5 5/8 |
10 |
1 |
1 1/8 |
3 5/8 |
| 12 |
11 5/8 |
8 |
7 5/8 |
15 5/8 |
1 |
1 1/4 |
7 5/8 |
11 5/8 |
1 |
1 1/8 |
5 5/8 |
| 16 |
15 5/8 |
12 |
11 5/8 |
19 5/8 |
1 |
1 1/4 |
11 5/8 |
15 5/8 |
1 |
1 1/8 |
7 5/8 |
| 20 |
19 5/8 |
14 |
13 5/8 |
23 5/8 |
1 |
1 1/4 |
13 5/8 |
17 5/8 |
1 |
1 1/8 |
9 5/8 |
| 24 |
23 5/8 |
16 |
15 5/8 |
27 5/8 |
1 |
1 1/4 |
15 5/8 |
19 5/8 |
1 |
1 1/8 |
11 5/8 |
| * before trimming |
|
|
|
|
|
|
|
|
|
|
